Tổng hợp các bài viết về dòng NAS chuyên nghiệp Buffalo

PS2Guy

New Member
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

Cho mình hỏi bác copy như thế nào thế: HDD-HDD trong NAS hay PC -> NAS.

Nếu PC --> NAS thì có lẽ bác phải dùng router Giga, vì router thường thì max chỉ là 100Mbps # 11-12Mb/s.

Với Giga thì em test với FW chuẩn nó lên đến khoảng 60MB/s lận mà bác? Nếu router Giga thì 20MB/s có thấp quá không. Chắc lôi con của em cài Debian lên thử xem thế nào.

Samba thì đương nhiên là phải copy từ PC <--> NAS rồi bạn, nếu chép trong nội bộ HDD <--> HDD thì dùng Samba làm gì ?

Hiện tại mình đang dùng router Giga mà? Nhưng như mình đề cập ở trên thì hoàn toàn chưa tinh chỉnh bất kỳ cái gì cả (Jumbo Frame vẫn để là 1500, chưa tinh chỉnh TCP_DELAY..vv), mục tiêu của mình không phải là để test tốc độ chép trên Terastation Pro II Rackmount ==> con này sẽ được deploy vào Datacenter với đường truyền cáp quang 2MB/s (Megabyte !!!!) chứ không để ở nhà (phục vụ seed/leech). Mình cũng không có ý định tinh chỉnh để đạt 60MB/s trên LAN :).

Kernel của Terastation Pro II Rack cần patch riêng ==> bạn cài thử đi :) cho nó chạy khoảng 15 phút là........có hiện tượng vui lắm !!!
 
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

to bác PS2Guy: tôi đang dùng con TerraStation Live (hình như mã là HS-DHTGL), liệu có thể dùng 1 ổ chạy Debian và 3 ổ NTFS đê chứa phim được ko?
Nếu có thể, bac cho tôi xin Image của con này với ?
Bac cũng chỉ giúp các bước cần làm sau đó (các pkgs nên cài) để đạt được kết quả mog muốn.
Thanks bác nhiều.
 

hddpro

New Member
Ðề: Không thể update firmware cho Buffalo LinkStation Quad LS-QL

2 hdd ko được đâu bác cắm thêm đi,bác cắm 2 cái nó dỗi chứ sao nữa
 

PS2Guy

New Member
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

to bác PS2Guy: tôi đang dùng con TerraStation Live (hình như mã là HS-DHTGL), liệu có thể dùng 1 ổ chạy Debian và 3 ổ NTFS đê chứa phim được ko?
Nếu có thể, bac cho tôi xin Image của con này với ?
Bac cũng chỉ giúp các bước cần làm sau đó (các pkgs nên cài) để đạt được kết quả mog muốn.
Thanks bác nhiều.

Mình đã test với Live và thấy rằng chạy hoàn toàn ổn cách này bạn ạ, tuy nhiên lúc này chưa phải lúc public Debian cho các dòng Terastation :)
 
Chỉnh sửa lần cuối:

PS2Guy

New Member
Ðề: Không thể update firmware cho Buffalo LinkStation Quad LS-QL

Cảm ơn các pác nhiều! Full HDD thì ok rồi! Mình cũng hiểu, nhưng muốn thử 1 hay 2 HDD như thế nào.

Không được đâu bạn, bất kỳ NAS 2/4 Bay thì phải gắn đủ HDD cho nó, nếu không thì không được đâu :)
 

blacksea

Member
Soft cho nas Debian

Hiện tại bác PS2Guy đã up lên 1 số kernel cho nas nhưng em chưa thấy có topic nào thảo luận về vấn đề cài đặt soft cho Debian.
Em thấy cài cho Debian không dễ như cho win sau khi tải về cài ok rồi còn phải config cho nó nữa nó mới chạy nên em lập topic này mong các cao thủ chỉ giáo thêm để em có thêm chút kiến thức về linux.
đầu tiên em xin copy mấy dòng lện của bác PS2Guy cài transmission,ntp.
Mã:
 #Webmin
apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl
wget http://prdownloads.sourceforge.net/webadmin/webmin_1.510-2_all.deb
dpkg -i webmin_1.510-2_all.deb

#Libevent 1.4.13
wget http://www.trochoidientu.com/debian_nas/libevent-1.4.13-armel-20108016.tar.zip
tar xvjf libevent-1.4.13-armel-20108016.tar.zip
dpkg -i libevent-1.4.13-armel-20108016.deb

#Transmission 2.04
wget http://www.trochoidientu.com/debian_nas/transmission-2.04-armel-20100816.tar.zip
tar xvjf transmission-2.04-armel-20100816.tar.zip
dpkg -i transmission-2.04-armel-20100816.deb


cài ntp 
apt-get install ntp
 cài usb mount,ntfs-3g để ghi xóa ntfs

apt-get install udev usbmount ntfs-3g mc
apt-get install libfuse2

mount -t ntfs-3g /dev/sdb1 /home/windows

sau khi cài thì lệnh mount có dạng như thế này 
cài chương trình down load

# apt-get install axel 
hoặc 
$ wget [url]http://wilmer.gaast.net/downloads/axel-1.0b.tar.gz[/url]
$ tar -zxvf axel-1.0b.tar.gz
$ ./configure
# make install
cách dùng 
$ axel [url]http://download.com/file.tar.gz[/url]
bạn cũng có thể hạn chế tốc độ bytes/s
$ axel -s 5242880 [url]http://download.com/my.iso[/url] 
có thể hạn chế down bao nhiêu luồng 1 lúc 
$ axel -n 3 -s 5242880 [url]http://download.com/my.iso[/url] 
bác nào thích web min thì cứ down về giả nén  rồi chạy setup.sh là ok 
cài samba

apt-get install samba samba-client 
sau khi cài xong thì thêm vào user
 useradd hai    (ví dụ tên hai)
 thêm pass cho user hai
smbpasswd -a hai
 sau đó copy đè file config mình gửi kèm là xong nếu bạn nào thích sửa gì thì sửa rồi copy đề vào file conf của nó 
 mình không thích các chương trình  khởi động cùng lúc khi debian boot lý do chip nas rất bèo vì vậy chạy cái nào thì gọi nó lên sau đó stop cho thằng khác chạy 
đây là 1 số kiến thức lượm  được từ internet và đã qua thử nghiệm  thành công.
nếu có gì chưa chuẩn mong các bác chỉ giáo để em rút kinh nghiệm.
thanks
em không up được file conf
để em up nội dung vậy 
conf transmission

{
    "alt-speed-down": 50, 
    "alt-speed-enabled": false, 
    "alt-speed-time-begin": 540, 
    "alt-speed-time-day": 127, 
    "alt-speed-time-enabled": false, 
    "alt-speed-time-end": 1020, 
    "alt-speed-up": 50, 
    "bind-address-ipv4": "0.0.0.0", 
    "bind-address-ipv6": "::", 
    "blocklist-enabled": false, 
    "dht-enabled": true, 
    "download-dir": "/home/Downloads", 
    "encryption": 1, 
    "incomplete-dir": "/home/Downloads", 
    "incomplete-dir-enabled": false, 
    "lazy-bitfield-enabled": true, 
    "lpd-enabled": false, 
    "message-level": 2, 
    "open-file-limit": 32, 
    "peer-limit-global": 240, 
    "peer-limit-per-torrent": 60, 
    "peer-port": 51413, 
    "peer-port-random-high": 65535, 
    "peer-port-random-low": 49152, 
    "peer-port-random-on-start": false, 
    "peer-socket-tos": 0, 
    "pex-enabled": true, 
    "port-forwarding-enabled": true, 
    "preallocation": 1, 
    "proxy": "", 
    "proxy-auth-enabled": false, 
    "proxy-auth-password": "", 
    "proxy-auth-username": "", 
    "proxy-enabled": false, 
    "proxy-port": 80, 
    "proxy-type": 0, 
    "ratio-limit": 2.0000, 
    "ratio-limit-enabled": false, 
    "rename-partial-files": true, 
    "rpc-authentication-required": true, 
    "rpc-bind-address": "0.0.0.0", 
    "rpc-enabled": true, 
    "rpc-password": "123456789", 
    "rpc-port": 9091, 
    "rpc-username": "admin", 
    "rpc-whitelist": "127.0.0.1", 
    "rpc-whitelist-enabled": false, 
    "script-torrent-done-enabled": false, 
    "script-torrent-done-filename": "", 
    "speed-limit-down": 100, 
    "speed-limit-down-enabled": false, 
    "speed-limit-up": 100, 
    "speed-limit-up-enabled": false, 
    "start-added-torrents": true, 
    "trash-original-torrent-files": false, 
    "umask": 18, 
    "upload-slots-per-torrent": 14
}
conf samba



#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
   wins server = wins server

# If we receive WINS server info from DHCP, override the options above. 
   include = /etc/samba/dhcp.conf

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = yes

# What naming service and in what order should we use to resolve host names
# to IP addresses
   name resolve order = 192.168.8.0/255 192.168.10.0/255


#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
   interfaces = 127.0.0.0/8 eth0 192.168.8.0/24 192.168.10.0/24


# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
   logon drive = H:
   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
   printing = bsd
   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
#cupsys-client package.
   printing = cups
   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#
   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)

   idmap uid = 10000-20000
   idmap gid = 10000-20000
   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
   winbind enum groups = yes
   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0775

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0775

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = hai

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
   comment = Network Logon Service
   path = /home
   guest ok = yes
  read only = no
  share modes = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
   comment = Users profiles
   path = /home
   guest ok = no
   browseable = yes
   create mask = 0775
   directory mask = 0775

[printers]
   comment = All Printers
   browseable = yes
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


[media]
comment = Home Directories
path = /media/usb0
browseable = yes
read only = no
create mask = 0775
directory mask = 0775
valid users = hai
 
Chỉnh sửa lần cuối:

PS2Guy

New Member
Ðề: Soft cho nas Debian

Cám ơn blacksea rất nhiều, mình sẽ cập nhật các bước cài đặt các soft cơ bản cho NAS một khi hoàn tất kernel cho các NAS ==> lúc đấy chúng ta sẽ có 1 tutorial cho tất cả vì lúc ấy các NAS đều là hệ Debian 2.6.34 Squeeze nên sẽ áp dụng cho tất cả.

Bạn có thể chỉnh sửa đoạn script ở trên lồng vào các đoạn BBCode Code hay không? Dễ hiểu hơn đấy... :)
 

laodatma

Member
Ðề: Soft cho nas Debian

Hoan hô các bác!

Mặc dù con quad mình đang thử với fw kenel được build cho nó chưa ổn nhưng chuyện phải biết sau khi nó boot lên ok rrồi thì vọc (cài thêm app, config...) như thế nào là rất càn thiết (vì hầu hết ae đều quá quen với con chuột và các wizard của win). Nói là tìm soft và cài nhưng tìm thế nào, cài ra sao là rất nhiều thứ phải tìm hiểu (do thay đổi khá nhiều thói quen sử dụng). Bản thân tôi cũng chỉ abc về cái món này (chủ yếu học mót ae trên 4rum) nhưng thấy nó rất hay vì khi cài soft trên này ít khi phải restart (điều mà trên win phải làm sau khi cài soft) để dv hoạt động. Bạn có thể làm chủ được nhiều thứ ngay từ cái việc cài fw gốc cho mấy cái nas có khi cũng giản tiện hơn rất nhiều mà không đi theo cách truyền thống (vì đã biết cấu trúc partion của NAS, có fw, biết cơ chết hoạt động ...). Chắc chắn các cao thủ như Ps2guy sẽ làm như vậy chứ nếu hỗ trợ cài quad cho ae mà phải có tb, có đầy đủ hdd "mồi" như tôi đã lọ mọ làm khi phải "tự chiến" với con quad của mình thì chắc chết quá :D

Hy vọng topic này sẽ liên tục phát triển!
 

PS2Guy

New Member
Ðề: Soft cho nas Debian

Dành cho các bạn nào không muốn tự mình biên dịch Transmission, đây là gói đã được biên dịch sẵn cũng như có sẵn các tập tin cấu hình, init script...vv và được đóng gói và một tập tin .deb để dễ dàng cài đặt....

Bắt đầu ......... copy & paste script nhé:

Mã:
#Webmin
apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl
wget http://prdownloads.sourceforge.net/webadmin/webmin_1.510-2_all.deb
dpkg -i webmin_1.510-2_all.deb

#Libevent 1.4.13
wget http://www.trochoidientu.com/debian_nas/libevent-1.4.13-armel-20108016.tar.zip
tar xvjf libevent-1.4.13-armel-20108016.tar.zip
dpkg -i libevent-1.4.13-armel-20108016.deb

#Transmission 2.04
wget http://www.trochoidientu.com/debian_nas/transmission-2.04-armel-20100816.tar.zip
tar xvjf transmission-2.04-armel-20100816.tar.zip
dpkg -i transmission-2.04-armel-20100816.deb

@blacksea: bạn đem các code này lên post#1 của bạn giúp mình nhé (nhớ đóng trong tag code nếu không mấy đường link bị vBul nó biến thành dấu ...... hết :D :D)

@laodatma: em không phải "cao thủ" anh ơi :) nói thế coi chừng em bị ném đá (có người thủ sẵn đá rồi :D :D).....
 

PS2Guy

New Member
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

(Update post #4)
Dành cho các bạn nào không muốn tự mình biên dịch Transmission, đây là gói đã được biên dịch sẵn cũng như có sẵn các tập tin cấu hình, init script...vv và được đóng gói và một tập tin .deb để dễ dàng cài đặt....

Bắt đầu ......... copy & paste script nhé:

Mã:
#Webmin
apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl
wget http://prdownloads.sourceforge.net/webadmin/webmin_1.510-2_all.deb
dpkg -i webmin_1.510-2_all.deb

#Libevent 1.4.13
wget http://www.trochoidientu.com/debian_nas/libevent-1.4.13-armel-20108016.tar.zip
tar xvjf libevent-1.4.13-armel-20108016.tar.zip
dpkg -i libevent-1.4.13-armel-20108016.deb

#Transmission 2.04
wget http://www.trochoidientu.com/debian_nas/transmission-2.04-armel-20100816.tar.zip
tar xvjf transmission-2.04-armel-20100816.tar.zip
dpkg -i transmission-2.04-armel-20100816.deb
 

PS2Guy

New Member
Ðề: Soft cho nas Debian

Plowshare để download từ các website như rapidshare.com/megaupload...vv (account free)..

Mã:
#Plowshare cho rapidshare/megaupload....vv
apt-get install curl recode imagemagick tesseract-ocr-eng spidermonkey-bin aview perlmagick gocr
wget http://plowshare.googlecode.com/files/plowshare_0.9.3-1_all.deb
dpkg -i plowshare_0.9.3-1_all.deb

Tham khảo cách sử dụng plowshare tại đây

@blacksea: hình như phiên bản axel ra đến phiên bản 2.4 rồi, sao bạn lại hướng dẫn cài bản 1.0 :) ==> http://axel.alioth.debian.org/
Có thể chỉnh sửa plowshare để nó sử dụng axel thay về wget để download nhanh hơn được không ta???? :D
 

blacksea

Member
Ðề: Soft cho nas Debian

Thanks bác nhắc nhở em hiii bạn nào cài bản cũ thì down bản mới về cài nhé
Mã:
axel https://alioth.debian.org/frs/download.php/3016/axel-2.4.tar.bz2
tar xvjf axel-2.4.tar.bz2
cd axel-2.4
./configure
make && make install
 

blacksea

Member
Ðề: Soft cho nas Debian

Mã:
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  aview: Depends: libaa1 (>= 1.4p5) but it is not going to be installed
  imagemagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
               Depends: libmagick10 but it is not going to be installed
               Depends: libxt6 but it is not going to be installed
  perlmagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
              Depends: libmagick10 but it is not going to be installed
  plowshare: Depends: gocr but it is not going to be installed
  recode: Depends: librecode0 (>= 3.6) but it is not going to be installed
  spidermonkey-bin: Depends: libmozjs1d (>= 1.9~b4) but it is not going to be installed
                    Depends: libnspr4-0d (>= 1.8.0.10) but it is not going to be installed
  tesseract-ocr-eng: Depends: tesseract-ocr (>= 2.00) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~#
debian:~# apt-get update
Hit http://ftp.us.debian.org lenny Release.gpg
Hit http://ftp.us.debian.org lenny Release
Ign http://ftp.us.debian.org lenny/main Packages/DiffIndex
Hit http://ftp.us.debian.org lenny/main Packages
Reading package lists... Done
debian:~# sudo apt-get install curl recode imagemagick tesseract-ocr-eng spidermonkey-bin aview perlmagick rhino
sudo: unable to resolve host debian
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  aview: Depends: libaa1 (>= 1.4p5) but it is not going to be installed
  imagemagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
               Depends: libmagick10 but it is not going to be installed
               Depends: libxt6 but it is not going to be installed
  perlmagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
              Depends: libmagick10 but it is not going to be installed
  plowshare: Depends: gocr but it is not going to be installed
  recode: Depends: librecode0 (>= 3.6) but it is not going to be installed
  rhino: Depends: default-jre-headless but it is not going to be installed or
                  java1-runtime-headless or
                  java2-runtime-headless or
                  java1-runtime or
                  java2-runtime
  spidermonkey-bin: Depends: libmozjs1d (>= 1.9~b4) but it is not going to be installed
                    Depends: libnspr4-0d (>= 1.8.0.10) but it is not going to be installed
  tesseract-ocr-eng: Depends: tesseract-ocr (>= 2.00) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~# dpkg -i -f plowshare_0.9.3-1_all.deb
dpkg: conflicting actions -f (--field) and -i (--install)

Type dpkg --help for help about installing and deinstalling packages [*];
Use `dselect' or `aptitude' for user-friendly package management;
Type dpkg -Dhelp for a list of dpkg debug flag values;
Type dpkg --force-help for a list of forcing options;
Type dpkg-deb --help for help about manipulating *.deb files;
Type dpkg --license for copyright license and lack of warranty (GNU GPL) [*].

Options marked [*] produce a lot of output - pipe it through `less' or `more' !
debian:~# apt-get install POSIX
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package POSIX
debian:~# apt-get install bash
Reading package lists... Done
Building dependency tree
Reading state information... Done
bash is already the newest version.
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  plowshare: Depends: curl but it is not going to be installed
             Depends: recode but it is not going to be installed
             Depends: imagemagick
             Depends: tesseract-ocr-eng but it is not going to be installed
             Depends: spidermonkey-bin but it is not going to be installed or
                      rhino but it is not going to be installed
             Depends: aview but it is not going to be installed or
                      caca-utils but it is not going to be installed
             Depends: gocr but it is not going to be installed
             Depends: perlmagick
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~# apt-get install curl bash recode imagemagick tesseract-ocr spidermonkey rhino aview libcaca PerlMagick
Reading package lists... Done
Building dependency tree
Reading state information... Done
bash is already the newest version.
E: Couldn't find package spidermonkey
debian:~# apt-get install rhino
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  plowshare: Depends: curl but it is not going to be installed
             Depends: recode but it is not going to be installed
             Depends: imagemagick
             Depends: tesseract-ocr-eng but it is not going to be installed
             Depends: aview but it is not going to be installed or
                      caca-utils but it is not going to be installed
             Depends: gocr but it is not going to be installed
             Depends: perlmagick
  rhino: Depends: default-jre-headless but it is not going to be installed or
                  java1-runtime-headless or
                  java2-runtime-headless or
                  java1-runtime or
                  java2-runtime
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~# apt-get install curl  recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagickdefault-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package perlmagickdefault-jre-headless
debian:~# apt-get install apt-get install curl  recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagickdefault-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package apt-get
debian:~#  apt-get install curl  recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagickdefault-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package perlmagickdefault-jre-headless
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime-headless is a virtual package provided by:
  java-gcj-compat-headless 1.0.78-2
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java1-runtime-headless has no installation candidate
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime-headless is a virtual package provided by:
  java-gcj-compat-headless 1.0.78-2
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java1-runtime-headless has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2
-bash: java-gcj-compat-headless: command not found
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless     java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree... 50%
Building dependency tree
Reading state information... Done
Package java2-runtime-headless is a virtual package provided by:
  openjdk-6-jre-headless 6b11-9.1
  java-gcj-compat-headless 1.0.78-2
  default-jre-headless 1.5-30
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java2-runtime-headless has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2
-bash: java-gcj-compat-headless: command not found
debian:~# apt-get install  openjdk-6-jre-headless 6b11-9.1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package 6b11-9.1
debian:~#   java-gcj-compat-headless 1.0.78-2
-bash: java-gcj-compat-headless: command not found
debian:~#   default-jre-headless 1.5-30
-bash: default-jre-headless: command not found
debian:~#   gij-4.3 4.3.2-2
-bash: gij-4.3: command not found
debian:~#   gij-4.2 4.2.4-4
-bash: gij-4.2: command not found
debian:~#   gij 4:4.3.2-2
-bash: gij: command not found
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless     java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java2-runtime-headless is a virtual package provided by:
  openjdk-6-jre-headless 6b11-9.1
  java-gcj-compat-headless 1.0.78-2
  default-jre-headless 1.5-30
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java2-runtime-headless has no installation candidate
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless      java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime is a virtual package provided by:
  java-gcj-compat 1.0.78-2
  jamvm 1.5.1-3
You should explicitly select one to install.
E: Package java1-runtime has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2
-bash: java-gcj-compat-headless: command not found
debian:~#  apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless      java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime is a virtual package provided by:
  java-gcj-compat 1.0.78-2
  jamvm 1.5.1-3
You should explicitly select one to install.
E: Package java1-runtime has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2  java-gcj-compat 1.0.78-2
-bash: java-gcj-compat-headless: command not found
debian:~#   jamvm 1.5.1-3
-bash: jamvm: command not found
debian:~#
hixx thằng plowshare cài khó kinh nó thiếu đủ thứ cài thằng này lại thiếu thằng kia
Bác PS2Guy ơi xem hộ em cái
 

PS2Guy

New Member
Ðề: Soft cho nas Debian

Mã:
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  aview: Depends: libaa1 (>= 1.4p5) but it is not going to be installed
  imagemagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
               Depends: libmagick10 but it is not going to be installed
               Depends: libxt6 but it is not going to be installed
  perlmagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
              Depends: libmagick10 but it is not going to be installed
  plowshare: Depends: gocr but it is not going to be installed
  recode: Depends: librecode0 (>= 3.6) but it is not going to be installed
  spidermonkey-bin: Depends: libmozjs1d (>= 1.9~b4) but it is not going to be installed
                    Depends: libnspr4-0d (>= 1.8.0.10) but it is not going to be installed
  tesseract-ocr-eng: Depends: tesseract-ocr (>= 2.00) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~#
debian:~# apt-get update
Hit http://ftp.us.debian.org lenny Release.gpg
Hit http://ftp.us.debian.org lenny Release
Ign http://ftp.us.debian.org lenny/main Packages/DiffIndex
Hit http://ftp.us.debian.org lenny/main Packages
Reading package lists... Done
debian:~# sudo apt-get install curl recode imagemagick tesseract-ocr-eng spidermonkey-bin aview perlmagick rhino
sudo: unable to resolve host debian
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  aview: Depends: libaa1 (>= 1.4p5) but it is not going to be installed
  imagemagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
               Depends: libmagick10 but it is not going to be installed
               Depends: libxt6 but it is not going to be installed
  perlmagick: Depends: liblcms1 (>= 1.15-1) but it is not going to be installed
              Depends: libmagick10 but it is not going to be installed
  plowshare: Depends: gocr but it is not going to be installed
  recode: Depends: librecode0 (>= 3.6) but it is not going to be installed
  rhino: Depends: default-jre-headless but it is not going to be installed or
                  java1-runtime-headless or
                  java2-runtime-headless or
                  java1-runtime or
                  java2-runtime
  spidermonkey-bin: Depends: libmozjs1d (>= 1.9~b4) but it is not going to be installed
                    Depends: libnspr4-0d (>= 1.8.0.10) but it is not going to be installed
  tesseract-ocr-eng: Depends: tesseract-ocr (>= 2.00) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~# dpkg -i -f plowshare_0.9.3-1_all.deb
dpkg: conflicting actions -f (--field) and -i (--install)

Type dpkg --help for help about installing and deinstalling packages [*];
Use `dselect' or `aptitude' for user-friendly package management;
Type dpkg -Dhelp for a list of dpkg debug flag values;
Type dpkg --force-help for a list of forcing options;
Type dpkg-deb --help for help about manipulating *.deb files;
Type dpkg --license for copyright license and lack of warranty (GNU GPL) [*].

Options marked [*] produce a lot of output - pipe it through `less' or `more' !
debian:~# apt-get install POSIX
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package POSIX
debian:~# apt-get install bash
Reading package lists... Done
Building dependency tree
Reading state information... Done
bash is already the newest version.
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  plowshare: Depends: curl but it is not going to be installed
             Depends: recode but it is not going to be installed
             Depends: imagemagick
             Depends: tesseract-ocr-eng but it is not going to be installed
             Depends: spidermonkey-bin but it is not going to be installed or
                      rhino but it is not going to be installed
             Depends: aview but it is not going to be installed or
                      caca-utils but it is not going to be installed
             Depends: gocr but it is not going to be installed
             Depends: perlmagick
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~# apt-get install curl bash recode imagemagick tesseract-ocr spidermonkey rhino aview libcaca PerlMagick
Reading package lists... Done
Building dependency tree
Reading state information... Done
bash is already the newest version.
E: Couldn't find package spidermonkey
debian:~# apt-get install rhino
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
  plowshare: Depends: curl but it is not going to be installed
             Depends: recode but it is not going to be installed
             Depends: imagemagick
             Depends: tesseract-ocr-eng but it is not going to be installed
             Depends: aview but it is not going to be installed or
                      caca-utils but it is not going to be installed
             Depends: gocr but it is not going to be installed
             Depends: perlmagick
  rhino: Depends: default-jre-headless but it is not going to be installed or
                  java1-runtime-headless or
                  java2-runtime-headless or
                  java1-runtime or
                  java2-runtime
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
debian:~# apt-get install curl  recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagickdefault-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package perlmagickdefault-jre-headless
debian:~# apt-get install apt-get install curl  recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagickdefault-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package apt-get
debian:~#  apt-get install curl  recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagickdefault-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package perlmagickdefault-jre-headless
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime-headless is a virtual package provided by:
  java-gcj-compat-headless 1.0.78-2
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java1-runtime-headless has no installation candidate
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless   java1-runtime-headless  java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime-headless is a virtual package provided by:
  java-gcj-compat-headless 1.0.78-2
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java1-runtime-headless has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2
-bash: java-gcj-compat-headless: command not found
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless     java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree... 50%
Building dependency tree
Reading state information... Done
Package java2-runtime-headless is a virtual package provided by:
  openjdk-6-jre-headless 6b11-9.1
  java-gcj-compat-headless 1.0.78-2
  default-jre-headless 1.5-30
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java2-runtime-headless has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2
-bash: java-gcj-compat-headless: command not found
debian:~# apt-get install  openjdk-6-jre-headless 6b11-9.1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package 6b11-9.1
debian:~#   java-gcj-compat-headless 1.0.78-2
-bash: java-gcj-compat-headless: command not found
debian:~#   default-jre-headless 1.5-30
-bash: default-jre-headless: command not found
debian:~#   gij-4.3 4.3.2-2
-bash: gij-4.3: command not found
debian:~#   gij-4.2 4.2.4-4
-bash: gij-4.2: command not found
debian:~#   gij 4:4.3.2-2
-bash: gij: command not found
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless     java2-runtime-headless java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java2-runtime-headless is a virtual package provided by:
  openjdk-6-jre-headless 6b11-9.1
  java-gcj-compat-headless 1.0.78-2
  default-jre-headless 1.5-30
  gij-4.3 4.3.2-2
  gij-4.2 4.2.4-4
  gij 4:4.3.2-2
You should explicitly select one to install.
E: Package java2-runtime-headless has no installation candidate
debian:~# apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless      java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime is a virtual package provided by:
  java-gcj-compat 1.0.78-2
  jamvm 1.5.1-3
You should explicitly select one to install.
E: Package java1-runtime has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2
-bash: java-gcj-compat-headless: command not found
debian:~#  apt-get install curl recode imagemagick tesseract-ocr-eng  aview  caca-utils gocr perlmagick default-jre-headless      java1-runtime     java2-runtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package java1-runtime is a virtual package provided by:
  java-gcj-compat 1.0.78-2
  jamvm 1.5.1-3
You should explicitly select one to install.
E: Package java1-runtime has no installation candidate
debian:~#  java-gcj-compat-headless 1.0.78-2 gij-4.3 4.3.2-2gij-4.2 4.2.4-4 gij 4:4.3.2-2  java-gcj-compat 1.0.78-2
-bash: java-gcj-compat-headless: command not found
debian:~#   jamvm 1.5.1-3
-bash: jamvm: command not found
debian:~#
hixx thằng plowshare cài khó kinh nó thiếu đủ thứ cài thằng này lại thiếu thằng kia
Bác PS2Guy ơi xem hộ em cái

Ủa ?!?! Sao trong này có java tá lả hết trơn vậy ?!?!? :D

Cài đặt các gói sau thôi mà...

Mã:
apt-get install curl recode imagemagick tesseract-ocr-eng spidermonkey-bin aview perlmagick gocr
 

bluke

Member
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

@PS2Guy: Sorry bác mấy hôm nay em bận công tác nên không test được. Hôm nay mới về và test kết quả như sau :

1. Sau khi cài vào và thay thế uImage.buffalo thì đèn xanh nước biển chớp liên tục đèn xanh lá cây đứng yên. Ping không thấy gì hết ===> fail. Hôm trước đi công tác thì ghim 4 ổ trong đó 1 debian thì lại lên. ===> Đau đầu thật.
 

phuongtm

New Member
Ðề: Khôi phục dữ liệu cho NAS Buffalo !!!

Hôm qua do sơ ý, mình xóa nhầm 1 folder share nằm ở khay đĩa thứ nhất của mình từ webgui của buffalo terastation.

Hiện bây giờ trên màn hình hiển thị của Terastation báo khay thứ nhất của mình rỗng ( tương ứng với folder share bị xóa nhầm ).

Mình search ở trên mạng thì thấy có soft "Raise Data Recovery for XFS" có thể phục hồi được dữ liệu theo hướng dẫn của trang xfs.org. Tuy nhiên soft này đòi hỏi phải có bản quyền mới cho phép khôi phục các tập tin trên 64KB :((.

Bạn nào có kinh nghiệm phục hồi được dữ liệu trên OS linux xin chia sẻ kinh nghiệm với.

Một kinh nghiệm xương máu cho mọi người dùng NAS buffalo !!!

Tôi đang dung cái TestDisk trong đĩa Hiren để scan xem có cứu được gì ko nhưng nó chạy lâu quá...
 

blacksea

Member
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

Không biết đây có phải lỗi không nhưng debian-ls-xhl khi samba để copy fim từ pc vào nasthì khoảng 10 phút mất kết nối nó báo không đủ đĩa lại phải browser vào lại thư mục copy và try again
 

PS2Guy

New Member
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

@PS2Guy: Sorry bác mấy hôm nay em bận công tác nên không test được. Hôm nay mới về và test kết quả như sau :

1. Sau khi cài vào và thay thế uImage.buffalo thì đèn xanh nước biển chớp liên tục đèn xanh lá cây đứng yên. Ping không thấy gì hết ===> fail. Hôm trước đi công tác thì ghim 4 ổ trong đó 1 debian thì lại lên. ===> Đau đầu thật.

Để mình có thời gian mới xử lý được em Quad này (phải kiểm tra kernel log xem nó bị cái gì), có hứa với bạn laodatma sẽ tìm cách cung cấp kernel cho Linkstation Quad cho bạn ấy nữa........chờ nhé !!! Stay tuned !!!

Không biết đây có phải lỗi không nhưng debian-ls-xhl khi samba để copy fim từ pc vào nasthì khoảng 10 phút mất kết nối nó báo không đủ đĩa lại phải browser vào lại thư mục copy và try again

Kiểm tra lại MTU/Jumbo Frame Size và các thông số TCP_DELAY...vv, mình bị lỗi này khi chỉnh NAS là 9KB trong trong PC chỉ có 7KB ==> chẳng những Samba crash mà KIS 2010 nó block luôn NAS vì báo là TCP_FLAG attack 3 lần :D phải unblock bằng tay đấy...
 

blacksea

Member
Ðề: Buffalo NAS - Debian Lenny Headless Server - FAQ & How to

thanks bác em không mount sda6 vào mnt mà cứ để thế nên không có đủ chỗ copy thật sau khi mount sda6 vào mnt thì copy ok rồi.
thanks bác
 
Bên trên