Ðề: OPPO (93, 95, 103, 105) - GIAO LƯU, CHIA SẺ KINH NGHIỆM SỬ DỤNG.
Vâng em hỏi là vào setting, rồi thư tự và lưu ý khi up firmware ntn. Chúc các bác cuối tuần vui vẻ...
Mình chưa up đc do dùng máy chiếu nên tối mới bật đc;
Cách làm tốt nhất là bác down về, copy file đã down vào 1 cái usb trống , bỏ đĩa và các hdd cắm vào oppo ra;
cắm usb chứa file vào oppo, bật lên
vào set up, chọn device setup, chọn firrmware upgrade, chọn via usb;
trong quá trình upgrade có thể nó sẽ hỏi thì chọn ok bằng remote, sau khi up xong nó sẽ tự tắt;
bác bật lên nó sẽ hỏi "Reset Factory Defaults" cứ chọn; sau đó bác lại vào seting để set các thông số tùy theo nhu cầu
4.Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc. Make sure that there is no other USB drive connected to the player.
5.Insert the USB drive containing the firmware file to a USB port on the player's front or back panel.
6.The player usually can recognize the firmware file and prompt you for firmware upgrade. In case the player does not prompt you, press the SETUP button on the remote control to enter the setup menu. Select Device Setup, Firmware Upgrade, and then Via USB.
7.Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
8.DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
9.In order to complete the firmware upgrade process, the player will turn off automatically. Unplug the USB drive after the player turns itself off.
10.Turn on the player again, a new on-screen prompt of "Reset Factory Defaults" will show. It is optional but recommended to reset the player settings by selecting "Reset Factory Defaults".
Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information. If you notice that the firmware versions displayed do not match the versions listed in this release note, please contact us to obtain the firmware files that are missing from a previous update.
11.Enter your customized settings as necessary.
Congratulations! You have just completed the firmware upgrade. Erase or discard the firmware file so you do not accidentally install the firmware again.