[Changes]
[Multimedia Player/ System]
1. Supports the Web-Remote 2nd version.
* Supports the automatic detection of iPhone, iPad, Android phone and notebook PC, and adjust the resolution accordingly.
* Supports the “Control” button which enables popping-up of same buttons as actual remote. So you can do anything with Web-Remote just like actual remote.
* Supports HDTV/ PHOTO main user interface.
* For changes and new usage please refer to
ftp://ftp.dvico.com/Manual/TViX/etc/Web_Remote_Eng.pdf
2.
Supports the APE/ CUE music file format.
* Supports the lossless APE music format.
* Supports the CUE playlist file as well.
3.
Supports the “Native Frame Rate”.
* Supports original frame rate of each file. (60i, 50i, 24p, 25p, 50i, 50p, 60p)
* You can configure the behavior of each frame-rate.
* This mode is only available when screen resolution is 1080p50Hz or 1080p60Hz.
* The “native resolution” (e.g. 480p24Hz 480p24Hz) is not supported at this moment
* To enable this Setup > AV > Video Auto Switch > Native framerate
4.
Supports the enforcement of audio pass-thru.
* This option can be turned on at Setup > AV > Audio & Video > Force audio pass-thru
* If you turn on this option then you set “RAW” digital audio pass-thru mode, the actual raw digital audio format will be output regardless of EDID information of TV.
* This will enable raw digital bit-stream output when you connect TVIX like TVIX > HDMI port > TV > optical cable > AV receiver.
* Some TV cannot pass-thru Dolby Digital or DTS properly. Please check your TV first.
5. Supports the OSD on/off.
* You can turn off the OSD for using TVIX as commercial playback machine.
6.
Supports the slow fast forward.
* After “pause”, press right button to enable 1/16x > 1/8x > 1/4x > 1/2 > 3/4x slow forward in turn.
7. Supports the subtitle text encoding regardless of menu language.
* You can select text encoding after popping-up subtitle window then “left” button (can see small triangular button on left side)
* You can also configure it at Setup > System > Language > Text encoding
8. Supports the subtitle “OFF” status.
* If you turn off the subtitle, then the status will be saved and be applied next time you boot-up.
9. Changes the default main user interface to brighter color combination.
10. Supports the 16:10 aspect ratio.
11. Supports the Polish and Portuguese menu language.
12. Fix the problem of some idx+sub subtitle.
13. Changes the Hebrew font for better looking of system menu.
[Network]
1. Improves IMS (Internet Media Service) functions quite a bit
* Rearranges overall icons and services.
* Improves “WEATHER” gadget. (Supports multi-national language and adds “favorite” location. So you can save your location for checking weather.)
* Pressing RIGHT button on You-Tube list will show the thumb-nail preview.
* Supports PLAY/PAUSE of You-Tube.
* Adds “Internet TV” service.
* You can download movie files on some service.
1. For example, go to IMS > Internet channel > HD net , then press “RIGHT” button on wanted movie clip.
2. Select “download” button, then the clip will be stored on /Movie folder.
2. Improves the network setup procedure
* Setup wizard will appear to ease the network setup
* Support the manual designation of hidden SSID. Click the “unknown” SSID at AP browser windows and input the name.
* Support both “OPEN” and “SHARED” network keys.
* Will memorize previous NETWORK KEY up to 4 APs (access points). You don’t have to re-input the NETWORK KEY during the setup procedure, if you done it once before.
3. Supports Ralink RT307x chipset Wi-Fi module
* Supports both WEP/ WPA configuration.
* Shows very good sustained performance (1080p streaming is O.K.)
* It will take about 30 seconds for initial setup of Ralink module.
* Most of the current 11n Wi-Fi dongles are RT307x based. Please let us know the USB VID/PID for adding your own RT307x based 11n Wi-Fi dongle.
