hoangtuan_neu
Active Member
[DOWNLOAD]http://demod.dvico.com/preRelease/tvix_M-6x00_1.3.129.zip[/DOWNLOAD]
Changes from 1.3.125
1. Added DVI for the TV connection.
- If you are using HDMI to DVI cable, you must select DVI.
- If DVI is selected, HDMI audio output and HD audio pass-through menu will be disabled.
- If Auto EDID is selected with DVI option, the Video and Audio option will be set based on the EDID.
- If other than Auto EDID is selected, Audio will be set depends on the selected TV connection type.
- When user pressed the TV outkey, the DVI will be set for 480P and 576P and audio data will not be transmitted over HDMI. Therefore, if you use HDMI, you must select correct option on the setup.
- On VFD, DVI will be shown only if DVI is selected. If HDMI is selected, there will be no info for the TV connection type.
- Fixed DVI motnitor goese black in specific case.
2. Fixed the IP is not correctly reset if the cable is re-connected.
Known issues and limitations for Video related
- Some TP/TS information may not correct.
- When HD Audio pass-through is on, S/PDIF does not output.
- When HD Audio pass-through is off with HD audio stream, the playback is not smooth.
○ When DTS audio setting is digital, HDMI audio is ON and HD audio pass-through is set to ON, then audio is not heard on the SPDIF output.
○ For the same setting, if HDMI audio is set to OFF, then it sounds through the SPDIF output.
- Some TP/TS files may cause the system rebooting.
- Some WMV may not play correctly.
- The digital output for AAC/WMA is disabled.
- Does not support PCM audio track on MP4 now.
- Some MKV with AAC may not sound.
- TVIX may not get IP from DHCP server after change between DTV and Player modes and this can be solved by retrying DHCP on the setup.
Known issues for Audio and pictures playing
- For MP3 files with low sampling frequency, the TVIX might crash while playing or trick play like FF or RW.
- M4A files are not supported now and AAC may not play correctly.
Known issues for PVR
- After channel changed, you may not here audio in short time. . To work around it, you can press DTV key or Audio key on the remote.
Known issues for general issues
- If you play files without refreshing the file list after delete files through FTP or SAMBA server, the system will reboot.
*** If you play files with HD audio tracks like Dolby TrueHD, , Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass through on the setup even though you don’t have a receiver that supports decoding of these formats. Otherwise, you will hear strange noise with some repetitive popping noise. Currently, we don’t support core decoding, if you don’t have a HD audio decoder receiver, you need to select other then these HD audio tracks audio track for now.
Best regards,
Changes from 1.3.125
1. Added DVI for the TV connection.
- If you are using HDMI to DVI cable, you must select DVI.
- If DVI is selected, HDMI audio output and HD audio pass-through menu will be disabled.
- If Auto EDID is selected with DVI option, the Video and Audio option will be set based on the EDID.
- If other than Auto EDID is selected, Audio will be set depends on the selected TV connection type.
- When user pressed the TV outkey, the DVI will be set for 480P and 576P and audio data will not be transmitted over HDMI. Therefore, if you use HDMI, you must select correct option on the setup.
- On VFD, DVI will be shown only if DVI is selected. If HDMI is selected, there will be no info for the TV connection type.
- Fixed DVI motnitor goese black in specific case.
2. Fixed the IP is not correctly reset if the cable is re-connected.
Known issues and limitations for Video related
- Some TP/TS information may not correct.
- When HD Audio pass-through is on, S/PDIF does not output.
- When HD Audio pass-through is off with HD audio stream, the playback is not smooth.
○ When DTS audio setting is digital, HDMI audio is ON and HD audio pass-through is set to ON, then audio is not heard on the SPDIF output.
○ For the same setting, if HDMI audio is set to OFF, then it sounds through the SPDIF output.
- Some TP/TS files may cause the system rebooting.
- Some WMV may not play correctly.
- The digital output for AAC/WMA is disabled.
- Does not support PCM audio track on MP4 now.
- Some MKV with AAC may not sound.
- TVIX may not get IP from DHCP server after change between DTV and Player modes and this can be solved by retrying DHCP on the setup.
Known issues for Audio and pictures playing
- For MP3 files with low sampling frequency, the TVIX might crash while playing or trick play like FF or RW.
- M4A files are not supported now and AAC may not play correctly.
Known issues for PVR
- After channel changed, you may not here audio in short time. . To work around it, you can press DTV key or Audio key on the remote.
Known issues for general issues
- If you play files without refreshing the file list after delete files through FTP or SAMBA server, the system will reboot.
*** If you play files with HD audio tracks like Dolby TrueHD, , Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass through on the setup even though you don’t have a receiver that supports decoding of these formats. Otherwise, you will hear strange noise with some repetitive popping noise. Currently, we don’t support core decoding, if you don’t have a HD audio decoder receiver, you need to select other then these HD audio tracks audio track for now.
Best regards,
